Chapter 9
Prove the way back
The chapter in a minute
- Only a restore proves a backup, and a copy that lives only on the hub may not help if the hub won't start.
- On the mainstream systems checked for this book, as of 8 November 2026, no official way to restore routines was found, so your written record is the way back, and that's a rebuild.
- Anything already sent online is out of reach of a restore, though you can ask the company to delete it.
- Someone else should be able to run your house from five lines on a note.
Try it now
Break it on purpose
0 of 13 steps done
Step 1 of 13
Put the key file and the hub's username and password in front of you, and check that the internet is up. If anything is missing, stop here and find it before you delete a thing. On the mainstream path, read your written record and fill any gap.
Try this
Try this, from the book
Ask someone in your home: 'If the hub stopped tonight, what would you do?' Write their answer down exactly as they say it, and don't correct them yet. If you live alone, ask the friend, relative or carer who would step in.
Tools and settings, as of a date
The book points to the ‘Backups and restore’ section of the companion page. Here it is in full, with the date each detail was checked. Open it on the companion page
Chapter 9 points here "with current menu names, figures for space and time, and reset steps by model", and for the setting that decides whether a backup is made before an update.
Current menu names (Home Assistant)
- Backups: Settings, System, Backups.
- Download a copy: Backups, Show all backups, the three dots beside a backup, Download.
- Backup before an update: the setting is called Backup preference when updating. It decides whether a backup is made before an update, and you can change it each time. On the hub's own operating system only.
- The recommended set-up backs up everything daily except media, share and local apps folders, and keeps the last 3. Backups stay on the hub unless you're signed in to the paid cloud service, which keeps one backup of up to 5 GB. So download a copy yourself.
Figures for space and time
- Space: at least 2 GB free. On a new device, more than the old one used, plus at least 2 GB.
- Time: about 45 minutes on a larger installation. Don't unplug it or refresh the screen while it runs.
- What you need: the internet, the emergency kit file with the backup's key, and the username and password you had when the backup was made.
Source: Home Assistant, Backups (opens in a new tab); Backup emergency kit (opens in a new tab).
On the mainstream systems we checked, we found no official way to restore your routines as of 8 November 2026, so your written record is the way back.
Other hub makers' options, as of 14 November 2026. SmartThings' help describes Replace Hub, which moves your devices and local Routines from your existing hub to a new one in the same location. It isn't a backup you hold, and the page doesn't say whether it works if the old hub has failed (SmartThings Enabled Hubs (opens in a new tab)). Some Amazon Echo models can be reset while keeping their smart home connections (see the table below), but no backup of routines was found on Amazon's pages. Apple's page on what iCloud backs up doesn't mention Home data (What does iCloud back up? (opens in a new tab)).
Reset steps by model
| Device | What the maker says | Source |
|---|---|---|
| Home Assistant Green | Take a backup first. A reset wipes the data and needs a working internet connection. Shut down, then hold the button while you plug the power back in, until the yellow light stays solid. Older software uses a different route. | Resetting Home Assistant Green (opens in a new tab) |
| Google speakers and displays | A reset clears data and can't be undone. It can't be done by voice or from the app. Some basic device data may stay connected to the home. Steps differ by model; see below. | Factory reset your Google smart speaker or display (opens in a new tab) |
| Google streaming devices | Remove it from the Google Home app first, then reset. | How to factory reset your Chromecast or Google TV Streamer (opens in a new tab) |
| Any Google device | Remove it from the app it was set up on. If you're done with it, reset it. | Remove a device from your Google Account (opens in a new tab) |
| Apple HomePod | Reset in the Home app first, or by hand. Ungroup a stereo pair first. Steps below. | Apple Support, HomePod reset (opens in a new tab) (published 1 November 2026) |
| Amazon Echo | A factory reset erases your personal information and the device's smart home connections. Echo (3rd or 4th Generation) and Echo Dot (2nd to 5th Generations): press and hold Microphone off and Volume down for 20 seconds, until the light ring turns off and on again. To keep smart home connections instead, hold the Action button for 20 seconds. Echo devices with a screen: Settings, Device Options, About this Device, Reset to Factory Defaults; or hold Microphones & Camera Disable/Enable and Volume Down until the Amazon logo shows, about 15 seconds. Then take it off your account with Deregister (see Walk the house). | Echo (3rd or 4th Generation) (opens in a new tab); Echo Dot (opens in a new tab); Echo devices with a screen (opens in a new tab) (no dates on the pages; read on 14 November 2026) |
Google, model by model. As Google's reset page (opens in a new tab) put it on 14 November 2026. On the first three, turn the microphone off with its switch first; on each, a sound or an announcement tells you it is resetting.
- Google Home Speaker (2026): switch on the bottom, then press and hold the top centre for about 15 seconds.
- Google Nest Audio: switch on the back, then press and hold the centre near the top for about 15 seconds.
- Google Nest Mini (2nd gen): switch on the side, then press and hold the centre, where the lights are, for about 15 seconds.
- Google Home Mini (1st gen): press and hold the reset button, the circle on the base below the power cable, for about 15 seconds.
- Google Home Max: press and hold the reset button on the back, near the power cable, for about 12 seconds.
- Google Home: press and hold the microphone mute button on the back for about 15 seconds.
- Google Nest Hub, Nest Hub (2nd gen) and Nest Hub Max: press and hold both volume buttons on the back together for about 10 seconds. Before you reset, Google says to delete Sleep Sensing data on a Nest Hub (2nd gen), and to save any video history you want and remove a Nest Hub Max from the Google Home app.
HomePod and HomePod mini. As Apple's reset page (opens in a new tab) (published 1 November 2026) put it on 14 November 2026. If two HomePods are a stereo pair, ungroup them first in the Home app.
In the Home app:
- Open the Home app on an iPhone, iPad or Mac signed in with the Apple Account used to set up the HomePod.
- Choose the HomePod, then its Settings.
- Choose Reset HomePod, then Remove Accessory. If no light appears on top of the HomePod, reset it by hand.
By hand:
- Unplug the HomePod, wait at least 10 seconds, then plug it back in.
- Wait 10 seconds, then touch and hold the top. A white spinning light turns red, and Siri says the reset is about to happen.
- Lift your finger after three beeps.
If a HomePod mini still won't reset, Apple's page also gives a restore using a Mac or PC and the cable from the box.
Asking a company to delete what it holds
In Ireland and the EU you can ask a company to delete what it holds about you, and it must answer within one month, which it can extend by two further months. There are grounds on which it can refuse. The UK has a similar right; its time limit was not confirmed. Sources: Data Protection Commission, Right to Erasure (opens in a new tab); GDPR (opens in a new tab), Articles 12(3) and 17; UK GDPR, Article 17 (opens in a new tab). This is general information, not legal advice.
Checked on: 8 November 2026, and 14 November 2026 for other hub makers, the Echo, Google and HomePod reset steps.
From the book
Only a restore proves a backup. A file with the right name and the right date can still let you down, and you won't know until you've brought something back from it.