Skip to content

Chapter 5

Your home network: who gets on and what they can reach


The chapter in a minute

  • Give every line on your router's list a name, and check any you can't place.
  • One password joins the network and the other changes the router, and neither goes on your sheet.
  • A guest network needs a password of its own, and your hub may not reach across it, so try one device first.

Try it now

Front door check

0 of 9 steps done

Step 1 of 9

Write the router's row on your sheet first: what it may see, what it may do and how to undo it. Something like 'May see: whoever has joined. May do: let them reach the internet. Undo: the way back page.'

Progress is saved in this browser only.

Try this

Try this, from the book

Open the list of what's connected and find three names you don't recognise. Write them down exactly as they appear, and do nothing else about them for now. Can't find three? Well done you! Pick the three you were slowest to place.

Tools and settings, as of a date

The book points to the ‘Home network’ section of the companion page. Here it is in full, with the date each detail was checked. Open it on the companion page

Chapter 5 points here "with the router screens and dates", with notes on particular providers and "the way in" to a router's settings.

The way in, and the router screens

The providers' own help pages, as read on 14 November 2026, describe the same general way in. You join the router's Wi-Fi, open a web browser, type the router's address into the address bar, and sign in with the details printed on a label on the router. Some providers also put settings in an app. If your router isn't listed here, the instructions that came with it, or your provider's app, are the place to look.

Eir, fibre box 7.

  1. Open your browser.
  2. In the address bar, enter 192.168.1.254 and press Enter.
  3. Enter your login details and choose LOGIN. Eir says the username is admin and the password is the Box password on the label on the back of the box.

Eir's page for the fibre box F3500 gives the same address; on that box the password is the WiFi password on the sticker on the back. Eir's guides for both boxes cover the WiFi name and password, the WiFi channel and parental control, and list no topic for a guest network or a list of connected devices. Sources: Access the Web Configurator, fibre box 7 (opens in a new tab); Access the Web Configurator, fibre box F3500 (opens in a new tab).

Vodafone Ireland, Gigabox. Vodafone's guide, written for a Windows 10 computer:

  1. Join your Wi-Fi. Its name and password are on the bottom of the modem.
  2. Open a browser and go to 192.168.1.1.
  3. Key in the username and password for the modem web interface, which are also on the bottom of the modem, and click Log In.

Vodafone says the Overview screen shows "connected devices", and the Wi-Fi screen is where you change the Wi-Fi name and password. Its modem support page also points to the Gigabox app for changing the Wi-Fi password. Sources: Establish a connection to the modem web interface (opens in a new tab); Guide to the modem web interface (opens in a new tab); Modem set-up and support (opens in a new tab).

Sky (Ireland), Gigafast+ Hub. Sky's page for Ireland puts some settings in the app:

  1. Open the My Sky app and tap Manage.
  2. Under 'Packages', tap Broadband.
  3. Tap WiFi Settings, then Advanced settings, and choose the setting.

For any other setting, type 192.168.0.1 into your browser and sign in to the hub admin. Sky says the username is admin and the password is the WiFi password on the back of your hub. The page names no list of connected devices. Source: Advanced settings for Sky Gigafast+ Hub (opens in a new tab).

These are the providers' instructions. Nobody has followed them on a real router for the book.

Notes on particular providers

ProviderWhat its own page saidChecked on
Virgin Media (UK)Guest network set-up steps for Hub 2, 2ac, Super Hub 1, Hub 3, 4, 5 and 5x. A guest network lets guests use the internet without reaching shared folders, files or linked devices. How to set up a guest network (opens in a new tab)8 November 2026
BT (UK)Guest Wi-Fi is set up in the Whole Home Wi-Fi app, for that range. The page names no models. What is Guest Network (opens in a new tab)8 November 2026
EirThe way in above, for the fibre box 7 and F3500. No guest network or list of connected devices among its device guides. fibre box 7 guides (opens in a new tab)14 November 2026
Vodafone IrelandGigabox: the Overview screen shows connected devices; the Wi-Fi password can also be changed in the Gigabox app. Links above14 November 2026
Sky (Ireland)Gigafast+ Hub: some settings in the My Sky app, the rest in the hub admin. No list of connected devices named. Link above14 November 2026

A guest network and your hub

Google's help says a network with "client isolation", which it says is also known as guest mode, stops devices talking to each other, and that set-up doesn't work through one (Trouble setting up a Google Nest or Home device (opens in a new tab)). Home Assistant's page for one kind of device says automatic discovery needs devices on the same network as the hub (Google Cast (opens in a new tab)). So try one device first.

If you change your Wi-Fi name or password, Google's devices need connecting to the new network, and some cameras are removed and added again, losing video history (How to connect your Nest or Home devices to a new Wi-Fi network (opens in a new tab)).

The advice behind chapter 5, with its dates

What a local-first hub still needs the internet for

On Home Assistant, first set-up downloads the latest version (Onboarding (opens in a new tab)), and restoring a backup needs the internet (Backups (opens in a new tab)). Sharing usage figures is off unless you turn it on. Day-to-day control of devices that talk to the hub directly doesn't need the internet.

Checked on: 8 November 2026, and 14 November 2026 for the way in and the Eir, Vodafone Ireland and Sky notes.