Skip to content

Chapter 6

Choose your hub, then switch it on


The chapter in a minute

  • Choose your path by what it may see, what it may do and how you'd undo it, and read those answers before you buy.
  • On the systems checked for this book, you can't hold your own copy of your routines and put it back yourself, so a written record does that job on the mainstream path.
  • Chapter 8's assistant with its limits is promised in full on the local-first path only.
  • Write the row first, keep the backup key off the hub, and make sure two people can get in.

Try it now

Row first, then hub

0 of 11 steps done

Step 1 of 11

Write the hub's row before you open anything: what it may see, what it may do and how to undo it. Put down only the one plug and the lamp.

Progress is saved in this browser only.

Try this

Try this, from the book

Pick one thing you already own that has an app, and find the page where its maker says what it collects. Give it five minutes, and write down the one item on it you didn't expect.

Tools and settings, as of a date

The book points to the ‘Choosing a hub’ section of the companion page. Here it is in full, with the date each detail was checked. Open it on the companion page

Chapter 6 points here "with today's kits, each path's latest position and the guides for your hub". It also promises the short list of exceptions for the phone app, and the user labels for each path.

Today's kits

Local-first path. The book's example is the ready-made hub sold for the program called Home Assistant, the Home Assistant Green. It comes with the system installed: plug in power and a network cable, then follow the screens in a browser or the app. It has a Gigabit Ethernet port and two USB ports and no radios of its own. Zigbee and Thread devices need a USB radio, which the maker says is "not strictly required". An internet connection is needed for first set-up. Source: Home Assistant Green (opens in a new tab). Naming it is no endorsement.

A plug that joins your Wi-Fi through the Matter standard is added only in the Home Assistant phone app, with the phone held close to the plug, and should be on the same network as the hub (Matter (opens in a new tab)).

Mainstream path. Look for a plug that the app says it works with. In the Google Home app, that means products marked "Works with Google Home" or Matter (Meet the Google Home app (opens in a new tab)). On Apple's system, routines need a HomePod or Apple TV acting as a home hub (Set up a home hub (opens in a new tab), published 15 September 2025).

A named plug, as an example. Home Assistant's own list of products its team has tested, Works with Home Assistant, includes the Ledvance SMART+ MATTER Plug UK White (model 4058075849501), listed as a Matter plug that joins your Wi-Fi, for UK sockets. Source: Works with Home Assistant, certified products (opens in a new tab). Checked on 14 November 2026. It is an example, not an endorsement, and nobody has added it on screen for the book. On the mainstream path, Matter is the label Google's help says to look for; no Google or Apple list that names this plug was read.

Each path's latest position

Local-first (Home Assistant)Mainstream
SeeThe makers say your data stays on the hub, apart from the exceptions you choose and those listed below.Google lists home and room names, automations and sensor readings among what it holds. Other makers' pages were not read on this point.
A backup you holdYes. You can make one, download it and restore it, on screen. Restoring needs the internet and the backup's key.Google offers a copy of your Nest data to download; we found nothing that puts it back. SmartThings moves devices and local routines to a replacement hub for you (its own help page, read 14 November 2026). Apple's backup page is silent on Home data.
Limiting an assistant by deviceYes, by the list you choose (see Connect an assistant).As of 8 November 2026 we found no way to limit the mainstream assistant to named devices, or to set a yes yourself.

Sources: Backups (opens in a new tab); Google Home and Nest Privacy Hub (opens in a new tab); SmartThings, Hubs Now Work Together as a Team (opens in a new tab) and FAQ (opens in a new tab) (both 12 November 2024).

As each company's own help put it on 14 November 2026:

The phone app's exceptions

Home Assistant says its phone app sends your phone's readings and location to your own hub, "to them and nowhere else", with these exceptions (How the app handles your data (opens in a new tab)):

  • notifications, which travel through Google's messaging service, where their contents are not encrypted;
  • crash reports on one Android build;
  • turning a location into an address, done by the phone's own service;
  • a public address sensor, if you turn it on;
  • the paid cloud relay, if you use it.

You can choose exact location, the name of the zone only, or none. Phone notifications are limited to 500 a day per device (Privacy, rate limiting and security (opens in a new tab)).

Usage figures. Sharing is off by default and "completely optional". If you turn it on, the choices are Basic, Usage, Statistics and Diagnostics. The setting is under Settings, System, Analytics (Analytics (opens in a new tab)).

User labels for each path

PathWhereThe labels
Home AssistantSettings, People, Add person (Person (opens in a new tab))Allow login gives the person an account. Options: Local access only (no access from outside your network) and Administrator rights.
Google HomeAdd, Home Member (Invite a home member (opens in a new tab); Manage people and permissions (opens in a new tab))Admin (full control, can add and remove people and devices) and Member (basic control, with Settings and Activity permissions you can switch on). Only Admins, or Members with the Settings permission, can create automations.
Apple HomeAdd People (Share control of your home (opens in a new tab), published 31 March 2026)Residents and Guests. "Add and Edit Accessories" is a permission you set for each person.

The guides for your hub

Checked on: 8 November 2026, and 14 November 2026 for the named plug, the restore guide and the SmartThings, Apple and Amazon notes.

From the book

A configuration file is a text file of settings. On this system, a few extras still need a line or two typed into one. Nothing in this book needs a configuration file, so if any guide sends you to one, stop and come back here.
Your Home Rung, chapter 6